Viking License Plate And Turn Signal Relocation Kit For Harley Davidson Sportster
Steel Built
Easy Install
Weather Resistant
Free HardwareDescription
- Made from Mild Steel
- Powder Coated (Black) Finish
- Application: Harley Davidson Sportster Nightster XL1200N 2007-2012, Sportster Forty Eight XL1200X 2010-2022, Sportster Seventy Two XL1200V 2012-2016, Sportster 1200 Iron XL1200NS 2018-2020, and 883 Iron 883N 2009-2022
Installation Guide
Feel free to reach out if you have any questions about installation.
Additional Details
Shipping
We will ship out the product within 48 hours of the order. Please allow 3-5 business days for the delivery.
Returns & Exchanges
You may return/exchange any of our product within 45 days of purchase. Visit our return center for hassle-free returns.
Questions? Talk to an expert | Phone: 888.208.1949
About
Licence Plate and Turn Signal Relocation Kit
Mild Steel
May be required
Harley Davidson Sportster Nightster XL1200N 2007-2012, Sportster Forty Eight XL1200X 2010-2022, Sportster Seventy Two XL1200V 2012-2016, Sportster 1200 Iron XL1200NS 2018-2020, and 883 Iron 883N 2009-2022
Black
People Are Asking
Is hardware included with my product?
Yes, any required hardware is included with all our luggage and parts. You don't have to worry about buying any extra hardware, unless explicitly stated.
Is this product covered by warranty?
Yes, all our products are covered by 1 year warranty. If you have any problem, give us a call and we'll be glad to help.
How long will it take for me to get my product?
We will ship out the product within 48 hours of the order. Please allow 3-5 business days for the delivery.
Customer Reviews
Easy install. Looks great. Wish I found it sooner!
Works great. I didn't relocate the break lights but I could if I get saddle bags. I got the mount to relocate the plate primarily. TIP: to remove the stock plate mount, remove the whole fender. Just do it. You'll thank me. Use a cutting tool to cut the plate mount from the reflector mount without having to drill the rivets. I used a 3" cutting wheel to cut most of the way through and just snapped it off when it was thin. (A 2nd pair of hands would be helpful here.) Then I used a file to smooth the rough edge. The rear most bolts are a bit hard to align to fit the retaining plates but with a little muscle they will fit. (This was the most difficult part of the install.) The wiring hardware that comes with the kit works fine. I extended the license plate light by about 8 inches. I cut near the top end by the plug. Just don't cut too close to the plug.
Pain in the butt to install, instructions may as well be in a foreign language but the end result is good
Great product. Easy install fast shipping... no complaints
In the process of getting installed